Automatic Higher Speed Flute Laminator With Auto Rolling-in excess of Device
Max.pace: 12000sheet/hour
The manufacturing line consists of a flute laminating device and a fully automated pile turning equipment. The high pace flute laminating machine is appropriate for the stick of paper and corrugated board. The motion manage system is perfectly integrated with the servo correction technique. Utilizing the relative placement of several sets of photoelectric induction paper, the servo motor on the two sides of the control paper is independently compensated, and the position of the bottom paper is tracked by the paper. Make the paper and the base paper correctly positioned. The machine is easy to work and just enter the dimensions of the paper, the machine will be adjusted by alone.
The entirely computerized turning device can complete the paper stacking, saving manpower and place, and fixing the difficulty of bending deformation following the paper is attached.
Parameters:
| Product | ZGFM-1450 | ZGFM-1650 |
| Max dimension | 1450*1450mm | 1650*1650mm |
| Min dimension | 450*450mm | 450*450mm |
| Relevant paper | a hundred and fifty-800g/mtwo | a hundred and fifty-800g/mtwo |
| Base paper | A-F corrugated board, ≤10mm | A-F corrugated board, ≤10mm |
| Pace | 150m/min | 150m/min |
| Sticker accuracy | ±1.5mm | ±1.5mm |
| Power | 33Kw | 38kw |
| Machine dimension | 22500*2200*2850mm | 22500*2300*2850mm |
Department INTRODUCTION:
Base PAPER FEEDING:
Use imported Servo motor electric powered managing system, with Japan NITTA suction belt to make suction electricity inverter, and belt cleaned by drinking water roller, Patented technology to ensure corrugate and cardboard goes out smoothly and basic procedure.
Best SHEET FEEDING Mechanism:
Outfitted with higher pace automobile focused feeder, equally paper lifting and feeding nozzle can freely change angle to the paper, to make sure that whether thick or slender paper can be shipped swiftly and smoothly.
CZPTAL Technique:
Developed in the accordance with CZPTpean CE requirement, make certain machine stability, higher efficiency and minimal failure. Making use of gentleman-device interface and PLC mixture, show all the information, this kind of as warning, mistake detect, failures, and running pace, etc on the monitor at a look.
PRE-STACK Element:
Pre-stack pile of paper beneath the situation of non-cease, increase effectiveness. The particular style of the pre stack paper frame, preserve time and work.
TRANSMISSION:
With imported double tooth belt travel and Switzerland ROSTA tension device make certain the push accurate, secure and lower noisy.
POSITIONING Program:
The use of a number of sets of photoelectric sensor at bottom sheets relative placement, handle best sheets on equally sides of the servo motor to do unbiased payment action, so that exact positioning of leading paper and the base paper.
GLUE ROLLER:
Stainless metal roller,never ever rust, after narrowly grinding, assured the bare minimum amountglue coated evenly. Down roller be cleaned by h2o roller.
Major EDGE FEEDING Technique(Choice)
This program is for alternative,more appropriate for large dimensions and thick bottom sheets.
ZF1450 automatic pile turner machine
Solution description
The paper can be laminated with paperboard to enhance the energy and thickness of the content or particular consequences. Following the die-cutting, it can be used for packaging containers, billboards and other functions.
The computerized pile turner equipment is an accessory product of the Flute Laminating Device, and contains a feeding table, a turning table and a paper acquiring table which are sequentially assembled. Whereby, the getting desk is related with the select-up device, and the paper rely is stacked into a counting pile and despatched into the turning desk. The counting paper stack is turned above when and not turned to the best of the turning desk by employing the turning mechanism in the turning desk. Then, the thrust system is fed into the prime of the getting desk, and after the entire paper is completed, the paper is dropped onto the pallet of the obtaining table. In this way, the paper is fully automated for paper counting, paper turning, and paper stacking, and has the result of flattening and affixing the paper, tremendously minimizing manpower demands, and successfully strengthening the paper-getting effectiveness. Reduce the guide supply depth.
Parameters:
| Design | ZF1450 |
| Max measurement | 1450*1450mm |
| Min measurement | 450*550mm |
| Electrical power | 8kw |
| Voltage | 380VAC/3P |
| Speed | 10000pcs/h |
| Air strain | .sixty five-.85Mpa |
| Equipment excess weight | 4000kg |
| Equipment dimension | 4780mmX2170mmX2850mm |
Machine transportation and packing
__________________________________________________________________________
one. The packing of little machines is affirm to export picket situation normal, powerful and durable. The wooden case’s thickness is generally 1 cm.
two. In order to be water-proof, we normally use bubble film to wrap machine.
3. We can handle shipping and delivery for consumers too.
Our Company:
_____________________________________________________________________
Certification:
______________________________________________________________________
FAQ:
______________________________________________________________________
Q1: Are you a company?
Of course, we are specialized manufacturer of scorching foil stamping machine and die cutting machine in China above 20 a long time.
Q2: Do you have stock products to sell?
We manufacture machines in batch. So most of devices have in inventory, remember to verify with us before purchasing.
Q3: How about installation and instruction?
Set up and education: If purchaser’s engineer travels at personal value to China, cost-free education session. If engineer despatched to purchaser’s factory, all journey expense compensated by purchaser.
Q4: How about guarantee?
Warranty period of time: twelve months from the shipping and delivery day of equipment. Warranty will be not legitimate if equipment matter to misuse or accidental injury or operator’s mistake. For the duration of the valid time, we will supply spare elements. If you have any other concerns, pls make contact with us and we will reply you by means of product’s photographs and videos to make each depth obvious.
Why decide on us?
_____________________________________________________________________
one.Our brand “INNOVO” is effectively-known in our domestic market place and over 70 countries and territories. CZPTpe, South America, Latin America, Southeast Asia, Center East, Africa etc.
two.Authentic products with outstanding high quality. Company has always proved the one hundred% good quality.
3.Soon after-product sales support and technological support: organization gives right after sales service and complex assistance as for every customers’ necessity and wants. Right after-sales provider provided engineers CZPT to service machinery abroad.
4.Expense conserving: lon-life, shock resistant and higher reliability bearings with superb quality and better efficiency, ensuing in increased value saving.
5.Much less value of purchase: We are the producer right.
six.Attendant customers queries promptly.
